Rcep Segotep Prime X Tempered Glass Matx Motherboard Gaming Computer Case

• Compatible Mainboard: Matx/Itx
• Power Supply: Without Power Supply
• Case Structure: MATX
• Type: Tower
• Material: SPCC
• Color: White
• Front Interface: USB3.0*1+USB2.0*2+HD Aduio
• Cable Management: Back Cable Management
• Maximum Lenght of Graphics Card: 290
• Sheet Thickness: 0.6mm
• Fans Position: 7 PCS Fan Position
• Pic Insert Slot: 7
• Transport Package: Canton
• Specification: 337mm*200mm*386mm
• Trademark: SEGOTEP
• Origin: China
• Production Capacity: 1000000

Product Description

Sales points

1	4mm tempered glass The MAX transparent tempered glass Four corners are stable
2	The MAX transparent tempered glass,enjoy light sense Esports.
4	Double side iron mesh ventilation    Industrial styling protect Double side iron mesh Increase panel wind inlet volume , Slight light penetration is more fashion
5	RGB flexible dazzle light   Active and gradual change

Case parameter
 

Case model:	Prime X
Packing size:	430*250*397mm
Cases size:	337*200*386mm
Hardware size:	300*200*375mm
Support motherboard specification	M-ATX/ITX
Graphic cards length limited	290 and 270MM
CPU radiator height limited	160MM
Power supply length limited	150MM
Disk bit:	Bottom 3.5inch*2 or 3.5inch*1+2.5inch*1   Case back board : 2.5inch*1
Fan Position:	Front 2*12 /14cm Fan         Top2*12cm  Fan    Rear12cm*1  PSU storage bits:12cm*2(Install ITX motherboard)
I/O port :	U2 version: USB2.0*2  HD AUDIO U3 version:  USB2.0*2,USB3.0*1, HD AUDIO
PCI insert slot	4

The use skill of Prime X
01.Reach your hand into the bottom groove of panel, pull heavily then the panel have been take out.
02.2.5 inch SSD directly lock the screws in motherboard position(Please lock SSD and then install the motherboard avoid interference).
03.Wring the bottom screws ,and take out the hard disk bracket .
04.After wring 2 Slide rail screws on hard disk , Push it along the rail,Wring right side screws and fixed.