Whole Computer Case 4*12cm Fan Structure/ Adopt Honeycomb Cool Down Side Panel Design Handle Matx Computer Case

• Compatible Mainboard: MicroATX
• Power Supply: Without Power Supply
• Case Structure: MATX
• Type: Tower
• Material: 0.6mm Main Structure
• Color: Black
• Front Interface: USB3.0+USB2.0+HD Aduio
• Cable Management: Back Cable Management
• Maximum Lenght of Graphics Card: 250
• Sheet Thickness: 0.6mm
• Fan: Front:12*2/Rear 12*1/Top12*1
• Transport Package: Canton
• Specification: 325*199*385mm
• Trademark: SEGOTEP
• Origin: China
• Production Capacity: 1000000

Product Description

 

Name	Knight -T(stock model)
FOB Shenzhen	US$8.9
Motherboard Support	M-ATX / ITX
Material	ABS front panel + SPCC side panel
I/O  Features	USB3.0+USB1.0*2+Audio
Fans Support	Front:	2*12cm Fan
	Rear:	1*12cm  Fan
	Side	1*12cm  Fan
Radiator Support
Dimensions (mm)	Packing	412*224*374mm
	Case	325*199*385mm
	Structure	290*183*350mm
Driver Bays Support	3.5"HDD	(MAX)2
	2.5"SDD	(MAX)2
Support	CPU cooler	height limitation 150mm
	Graphics card	length limitation 250mm
Structure Thickness	0.35mm main structure
Packing Carton Material	EPS  65g / A=B
Power Supply Support	ATX
MOQ	500
Qty/40'HQ	1,930

Segotep Intelligent manufacturing  steady as a mountain

Knight T
MATX flexible and smart business computer case

Whole computer case 4*12cm fan structure that is reasonable to cooling the air duct,adopt honeycomb cool down side panel design,satisfied mute requirement at the same time when

Powerful compatibility ,no need to worry data storage
Support 5.25 inch optical drive(max length 170mm),front hard disk vertical install is more venting.MAX space is easy to install.

Ergonomics incorporates handle design,portable move is more comfortable.
The case adopt Ergonomics incorporates design,fit to human handle curve,which is available to handle by single hand.

183mm wide case body   Hardware is smart and flexible installation
12cm rear fan bit,compare to same level case that rear 8cm fan's bit,the cooling ability is more powerful.The side panel is double convex design,huge space is save.

Knight T use secret
1.Reach into the groove of the bottom panel by hand,Pull outwards slightly to remove the panel.
2.After front hard disk use slide rail screws and slide in the hole bits,then lock side screws and fix it.
3.The bottom hard disk lock screws directly to fix.
4.Take down panel and the optical drive baffle of hardware front panel,put the optical drive into the case and then lock the left and right side screws to fix it.(please install the PSU firstly avoid  interference)